How Should The Filter Cloth Of A Belt Filter Press Be Cleaned And Maintained?

Aug 17, 2026 Leave a message

Belt filter presses are typically designed with an automatic washing system, which cleans the filter belt while the equipment is in operation. However, what should be done if particles become lodged in the mesh belt and cannot be removed by this system? These trapped particles-often small stones-can damage the filter belt if not removed promptly, thereby shortening its service life. Consequently, ensuring the filter belt is thoroughly cleaned is of critical importance. The cleaning procedure is as follows:
1) Prepare a pair of tweezers.

2) Stop the operation of the equipment.

3) Use the tweezers to pick out the larger particles lodged in the mesh belt.

4) Once the larger particles have been removed, run the equipment's automatic washing system for approximately 20 to 25 minutes.