Precautions for Industrial Filter Cloth

Sep 08, 2026 Leave a message

Bag-Type Dust Collectors
① Filter cloths should be installed with appropriate tension-neither too loose (which promotes dust accumulation) nor too tight (which risks tearing).
② Do not mix new and old filter bags; differences in their wear-and-tear timelines can disrupt the equipment's normal operation.
③ Used filter bags should be cleaned with compressed air and inspected for holes. If holes are found, repair the bags and set them aside for future use. If a filter bag is clogged with dust, wash it with water, allow it to dry, and store it for future use.


Filter Bags for "Wood-Ear" (Disc/Leaf) Type Filters
① During installation, ensure the filter bags do not snag on hard objects, as this can damage the synthetic fibers and lead to premature perforation.
② Stop the filtration process once the filter cake reaches an optimal thickness; removing the cake before resuming operation helps extend the service life of the filter bags.
③ When replacing filter bags, do not pull them down by grabbing them directly with hard objects; instead, apply force only to the auxiliary straps sewn onto the bags.
④ When removing filter cakes, keep the removal tool as parallel to the filter cloth as possible to avoid damaging the bags.


Filter Presses
① When installing filter cloth, ensure it is smooth and securely fixed across the plate-and-frame assembly; otherwise, folds or creases may cause the cloth to tear when the plates are compressed.
② Do not leave filter cakes adhered to the cloth for too long, as this can cause the cloth to deform or sag.
③ When removing filter cakes, use a scraper in the same direction as the weave or orientation of the filter cloth.