Physical Cleaning Methods
Physical cleaning methods include manual cleaning and mechanical vibration cleaning. For manual cleaning, the filter cloth must be removed; its surface should then be gently scrubbed using a soft-bristled brush or a sponge dampened with warm water-a mild, non-corrosive detergent may also be used-followed by a thorough rinse with clean water. For mechanical vibration cleaning, the filter cloth remains installed on the filtration equipment; the vibration mechanism is activated to loosen impurities, while a high-pressure water jet is used simultaneously to wash them away. Water pressure must be carefully controlled to avoid damaging the filter cloth.
Chemical Cleaning Methods
Chemical cleaning methods are tailored to specific types of blockages. Acidic solutions are used for inorganic blockages; the cloth can be soaked in a solution such as dilute hydrochloric acid for several hours, then rinsed with clean water until the pH is neutral. Alkaline solutions are used for organic blockages, with sodium hydroxide solution being a common choice for soaking. Oxidizing agents are employed for stubborn impurities-for instance, by soaking the cloth in a sodium hypochlorite solution-though both the concentration and the duration of exposure must be strictly controlled. In all cases, the filter cloth must be thoroughly rinsed with a large volume of clean water after the cleaning process.






